GNS3 Networking Labs: All Access Course for CCNA, CCNP, CCIE and much more!
New labs added on a regular basis on the following topics: CCNA, Network Automation, Python and more!
Watch Promo
off original price!
The coupon code you entered is expired or invalid, but the course is still available!
Welcome to the GNS3 Ultimate labs course!
New labs will be added on a regular basis. But, also tell me which topics you want added to the course and I will do my best to add them!
This course will continue to grow and grow!
You will have access to downloadable GNS3 project files so you can get started quickly.
Topics include:
1) CCNA R&S
2) CCNP - ROUTE, SWITCH and TSHOOT
3) CCIE R&S
4) Multi-vendor topologies
5) Large scale networks
6) Network Automation and Programmability
I will keep on adding more and more labs based on your feedback!
Your GNS3 Academy Instructor
David Bombal
David Bombal (CCIE #11023 Emeritus) passed his Cisco Certified Internetwork Expert Routing and Switching exam in January 2003. David has the highest rated and most popular course in the GNS3 Academy: SDN and OpenFlow Introduction.
David's software tools and training have been downloaded +100,000 times. Many thousands of engineers like you use his tools and training on a regular basis.
David has developed over 20 courses for HP which are used worldwide. These include multiple SDN courses and HP ASE certification courses (4 day Instructor led training).
David's YouTube videos have been viewed +1 million times.
David has been training Cisco and networking courses for 15+ years and has delivered instructor led courses in various countries around the world covering a wide range of Cisco topics from CCNA to CCIE.
He has also personally developed Cisco engineer utilities such as the VPN Config Generator, software, training materials, EBooks, videos and other products which are used throughout the world.
YouTube: https://www.youtube.com/user/ConfigTerm/
Twitter: https://twitter.com/davidbombal
LinkedIn:
linkedin.com/in/davidbombal
GNS3 Academy Curriculum
Welcome!
Available in
days
days
after you enroll
Welcome to the course!
Available in
days
days
after you enroll
GNS3 Windows Install VMware
Available in
days
days
after you enroll
GNS3 Windows Install VirtualBox
Available in
days
days
after you enroll
GNS3 New Features
Available in
days
days
after you enroll
GNS3 Discussions with Jeremy Part 1
Available in
days
days
after you enroll
-
StartWill Dynamips and VPCS be removed from GNS3? (10:47)
-
StartGNS3: What is QEMU? And IOU? And ASA 8.x? (7:08)
-
StartGNS3: Docker containers vs Virtual Machines (8:21)
-
StartJeremy explains the GNS3 2.2 Architecture (13:08)
-
StartGNS3 API: Jeremy explains how the API works (8:31)
-
StartGNS3 2.2: Jeremy tells us about the new features (12:19)
-
StartGNS3: Version 2.2 and the Future? (8:13)
GNS3 Discussions with Jeremy Part 2
Available in
days
days
after you enroll
-
StartWhat is Qemu? (2:12)
-
StartTechnical Detail of Ubridge (2:20)
-
StartPlans in Cloud Version of GNS3 (1:03)
-
StartNested Virtualization in the Cloud (1:26)
-
StartDo you prefer Virtual or Physical Service? (0:32)
-
StartWhat is Nested Virtualization? (1:29)
-
StartBIOS enable Nested Virtualization (2:38)
-
StartWhat is the difference between QEMU and DOCKER? (5:53)
-
StartWhat is GNS3 VM? (4:46)
-
StartWhat is GNS3 Dynamips? (3:25)
-
StartWhich is Better Virtual Box or VMware? (2:42)
-
StartWhat is going on with VMware? (2:38)
-
StartBig Features in 2.2 GNS3 (1:39)
-
StartWhat is IOU? (1:42)
-
StartGNS3 Reccomendation of Barrel Images (1:07)
-
StartQuestion from the community - ASA is not working (1:12)
-
StartGNS3 Compost of 2 Components (1:13)
-
StartI used a Mac - Jeremy Linux (1:04)
-
StartGNS3 on Linux (1:54)
-
StartWould you recommend local gns3 VM? (2:51)
-
StartInstalling GNS3 - Anti Virus (1:49)
-
StartHow much RAM, CPU to run GNS3? (2:48)
-
StartWhich Operating System the GNS3 support? (2:06)
-
StartWhat is QT client? (1:19)
-
StartWhat is GNS3 Controller? (6:02)
-
StartWireless in GNS3 (5:52)
-
StartQuestions from Social Media 1 (10:39)
-
StartQuestions from Social Media 2 (3:27)
EtherChannel
Available in
days
days
after you enroll
-
StartEtherChannel: Can you complete the lab? (4:05)
-
StartEtherChannel: Answers Part 1 (7:14)
-
StartEtherChannel: Answers Part 2 (9:35)
-
StartEtherChannel: Answers Part 3 (10:42)
-
StartEtherChannel: Answers Part 4 (6:14)
-
StartEtherChannel: Answers Part 5 (6:14)
-
StartEtherChannel: Answers Part 6 (6:48)
OSPF
Available in
days
days
after you enroll
-
StartOSPF Troubleshooting Lab 1: Can you fix the network?
-
StartOSPF Troubleshooting Lab 1: Answers (9:31)
-
StartOSPF Troubleshooting Lab 2: Can you fix the network?
-
StartOSPF Troubleshooting Lab 2: Answers (5:59)
-
StartOSPF Troubleshooting Lab 3: Can you fix the network?
-
StartOSPF Troubleshooting Lab 3: Answers (9:16)
EIGRP
Available in
days
days
after you enroll
-
StartEIGRP Troubleshooting Lab 1: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 1: Answers (8:12)
-
StartEIGRP Troubleshooting Lab 2: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 2: Answers (5:46)
-
StartEIGRP Troubleshooting Lab 3: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 3: Answers (6:08)
-
StartEIGRP Troubleshooting Lab 4: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 4: Answers (7:01)
-
StartEIGRP Troubleshooting Lab 5: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 5: Answers (3:20)
-
StartEIGRP Troubleshooting Lab 6: Can you fix the network?
-
StartEIGRP Troubleshooting Lab 6: Answers (7:59)
GNS3 Campus 1
Available in
days
days
after you enroll
-
StartGNS3 Campus 1: Part 1 (7:02)
-
StartGNS3 Campus 1: Part 2 (5:57)
-
StartGNS3 Campus 1: Part 3 (9:13)
-
StartGNS3 Campus 1: Part 4 (8:05)
-
StartGNS3 Campus 1: Part 5 (7:28)
-
StartGNS3 Campus 1: Part 6 (6:49)
-
StartGNS3 Campus 1: Part 7 (4:20)
-
StartGNS3 Campus 1: Part 8 (6:41)
-
StartGNS3 Campus 1: Part 9 (5:27)
-
StartGNS3 Campus 1: Part 10 (9:06)
-
StartGNS3 Campus 1: Part 11 (2:35)
-
StartGNS3 Campus 1: Part 12 (3:58)
-
StartGNS3 Campus 1: Part 13 (7:11)
-
StartGNS3 Campus 1: Part 14 (3:23)
-
StartGNS3 Campus 1: Part 15 (2:40)
-
StartGNS3 Campus 1: Part 16 (10:03)
-
StartGNS3 Campus 1: Part 17 (14:25)
-
StartGNS3 Campus 1: Part 18 (13:53)
-
StartGNS3 Campus 1: Part 19 (6:44)
-
StartGNS3 Campus 1: Part 20 (6:15)
-
StartGNS3 Campus 1: Part 21 (8:22)
-
StartGNS3 Campus 1: Part 22 (2:49)
-
StartGNS3 Campus 1: Part 23 (6:54)
-
StartGNS3 Campus 1: Part 24 (6:16)
-
StartGNS3 Campus 1: Part 25 (7:43)
-
StartGNS3 Campus 1: Part 26 (5:14)
-
StartGNS3 Campus 1: Part 27 (1:41)
-
StartGNS3 Campus 1: Part 28 (7:54)
BGP
Available in
days
days
after you enroll
-
StartBGP Configuration: Can you complete the lab?
-
StartBGP Configuration: Answers (14:23)
-
StartBGP Troubleshooting Lab 1: Can you complete the lab?
-
StartBGP Troubleshooting 1: Answers (8:26)
-
StartBGP Troubleshooting Lab 2: Can you complete the lab?
-
StartBGP Troubleshooting Lab 2: Answers (6:06)
-
StartBGP Troubleshooting Lab 3: Can you complete the lab?
-
StartBGP Troubleshooting: Scenario 3 (6:07)
Network Programmability with Python
Available in
days
days
after you enroll
-
StartPart 1: Network programmability made easy. (16:22)
-
StartPart 2: Configure VLANs on switches. (8:12)
-
StartPart 3: Remove Passwords and improve scripts (8:43)
-
StartPart 4: Create switch VLANs using loops (8:29)
-
StartPart 5: Multiple switches, multiple VLANs (17:58)
-
StartPart 6: In-band management and save configs (4:33)
-
StartPart 7: How to write better code and styles (5:29)
-
StartPart 8: Opening Files and spacing importance! (11:54)
-
StartPart 9: Backup switch configurations. (10:25)
-
StartPart 10: Jupyter Python Clients (3.0 and 2.7) (11:40)
-
StartPart 11: Paramiko, SSH, Python and Cisco (14:12)
-
StartPart 12: Netmiko, SSH, Python and Cisco switches Part 1 (10:26)
-
StartPart 13: Netmiko, SSH, Python Cisco switches Part 2 (5:59)
-
StartPart 14: Netmiko, SSH, Python Cisco switches Part 3 (9:34)
-
StartPart 15: - Netmiko, SSH, Python Cisco switches (7:19)
-
StartPart 16: Netmiko, SSH, Python Cisco switches (10:37)
-
StartPart 17: Netmiko, SSH, Python Cisco switches (7:42)
Network Automation Appliance
Available in
days
days
after you enroll
MPLS
Available in
days
days
after you enroll
-
StartMPLS Introduction & L3VPNs (7:12)
-
StartMPLS Terms and definitions (4:52)
-
StartL2VPNs (2:39)
-
StartMPLS Traffic Engineering (1:57)
-
StartMPLS Labels (4:08)
-
StartMPLS Demo Overview (7:09)
-
StartCore MPLS Configuration (6:58)
-
StartMPLS Core Verification with Wireshark captures (6:35)
-
StartMPLS Core Verification (Part 2) (3:05)
-
StartMPLS Traceroute (MPLS Verification) (1:32)
-
StartHide the core MPLS network from customers (2:21)
-
StartVirtual Routing and Forwarding Instances (VRFs) (6:35)
-
StartVRF Testing - the same IP address on multiple router interfaces (2:43)
-
StartMPLS VPNV4 and OSPF Configuration (7:25)
-
StartCE OSPF (5:38)
-
StartPE2 Configuration (6:23)
-
StartRedistribution and testing (6:23)
-
StartTesting and verification (3:58)
-
StartMPLS PPT - Thanks Richard! (1:11)
DMVPN
Available in
days
days
after you enroll
IP SLA
Available in
days
days
after you enroll
Port Security
Available in
days
days
after you enroll
-
StartPort Security Overview (3:13)
-
StartPort Security and security mechanisms (1:23)
-
StartMAC addresses Port Security Static, Dynamic, Sticky (3:11)
-
StartPort Security Demo Part 1 (9:03)
-
StartPort Security Demo Part 2 (9:19)
-
StartPort Security Demo Sticky (2:52)
-
StartPort Security Error disable and auto recovery (5:14)
DHCP Snooping
Available in
days
days
after you enroll
GNS3, Python and Regular Expressions
Available in
days
days
after you enroll
Cisco VIRL
Available in
days
days
after you enroll
Cisco VIRL ASA 9.7.1
Available in
days
days
after you enroll
ASDM
Available in
days
days
after you enroll
-
StartGNS3, Cisco ASA and ASDM- Configure VIRL ASAv firewall with GNS3 and ASDM (Part 1) (9:08)
-
StartGNS3, Cisco ASA and ASDM- Configure VIRL ASAv firewall with GNS3 and ASDM (Part 2) (12:51)
-
StartGNS3, Cisco ASA and ASDM- Configure VIRL ASAv firewall with GNS3 and ASDM (Part 3) (12:08)
-
StartGNS3, Cisco ASA and ASDM- Configure VIRL ASAv firewall with GNS3 and ASDM (Part 4) (10:13)
-
StartGNS3, Cisco ASA and ASDM- Configure VIRL ASAv firewall with GNS3 and ASDM (Part 5) (4:46)
PPP Troubleshooting labs
Available in
days
days
after you enroll
PPP Troubleshooting labs: Use debugs to fix the network!
Available in
days
days
after you enroll
TUNNELS COURSE FROM HERE: GNS3 Lab - GRE Tunnel
Available in
days
days
after you enroll
GNS3 Lab - IPsec VPN
Available in
days
days
after you enroll
DMPVN: GRE and IPsec
Available in
days
days
after you enroll
-
StartDMPVN BGP, GRE and IPsec Can you complete the lab? (6:51)
-
StartYou get access to VPN Config Generator Software
-
StartDMPVN BGP, GRE and IPsec Answers Part 1 (6:05)
-
StartDMPVN BGP, GRE and IPsec Answers Part 2 (9:23)
-
StartDMPVN BGP, GRE and IPsec Answers Part 3 (8:51)
-
StartDMPVN BGP, GRE and IPsec Answers Part 4 (11:09)
-
StartDMPVN BGP, GRE and IPsec Answers Part 5 (10:45)
-
StartDMPVN BGP, GRE and IPsec Answers Part 6 (8:57)
-
StartDMPVN BGP, GRE and IPsec Answers Part 7 (7:57)
-
StartDMPVN BGP, GRE and IPsec Answers Part 8 (7:17)
Dynamic IPsec Peers
Available in
days
days
after you enroll
Building Scalable GNS3 Networks
Available in
days
days
after you enroll
-
StartGNS3 Talks: Building insane (large scale) GNS3 networks (Part 1). What do you want to see? (2:34)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 2). Hardware and other questions answered. (8:01)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 3). Start small and grow.... SMB Part 1 (9:24)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 4). DHCP Server, Router on a stick, SMB Part 2 (14:43)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 5). Building the first BGP based ISP network (10:05)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 6). Building the first BGP based ISP network (8:04)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 7): BGP Route Reflectors (12:04)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 8): BGP ISP Network (10:57)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 9): Testing Customer connectivity (7:32)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 10): ISP configuration and troubleshooting (14:11)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 11): ISP configuration and troubleshooting (8:02)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 12): Multivendor ISP Cisco, Arista, HPE, Linux (12:18)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 13): Multivendor ISP Cisco, Arista, HPE, Linux (8:12)
-
StartGNS3 Talks: Building large scale GNS3 networks (Part 14): Multivendor ISP Cisco, Arista, HPE, Linux (5:50)
PYTHON 3 COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
Quick Start Guide to Network Automation
Available in
days
days
after you enroll
-
StartQuick Start 1: GNS3 Lab Setup and IDEs (10:22)
-
StartQuick Start 2: Telnet Script creation (11:20)
-
StartQuick Start 3: Telnet Script Test (6:04)
-
StartQuick Start 4: Telnet to a switch and create VLANs (8:15)
-
StartQuick Start 5: Loops (7:29)
-
StartQuick Start 6: PEP8: Python Style Guide (2:41)
-
StartQuick Start 7: Configure switch VLANs using loops (8:55)
-
StartQuick start 8: Create a multiple switch network (8:16)
-
StartQuick Start 9: Open a file of switch IP addresess (8:22)
-
StartQuick Start 10: Configure multiple switch with a loop (3:00)
-
StartQuick Start 11: Loops within loops (6:51)
-
StartQuick Start 12: Backup Network Device Configurations (7:09)
Netmiko: Use SSH for Network Automation
Available in
days
days
after you enroll
-
StartNetmiko Part 1: Introduction (2:34)
-
StartNetmiko Part 2: Enable SSH on switches in network (4:38)
-
StartNetmiko Part 3: Your first Netmiko SSH Script (8:00)
-
StartNetmiko Part 4: Script for multiple switches (3:55)
-
StartNetmiko Part 5: Run script and configure multiple devices (5:10)
-
StartNetmiko Part 6: File of multiple Cisco commands (5:55)
-
StartNetmiko Part 7: Program multiple switches with file of commands (10:16)
-
StartNetmiko Part 8: Script to program entire network (5:43)
-
StartNetmiko Part 9: Run script to program entire network (4:41)
NAPALM
Available in
days
days
after you enroll
NAPALM and BGP
Available in
days
days
after you enroll
-
StartUse NAPALM to retrieve BGP neighbor information: Part 1 (P75_1) (2:09)
-
StartUse NAPALM to retrieve BGP neighbor information: Part 2 (P75_2) (5:11)
-
StartUse NAPALM to retrieve BGP neighbor information: Part 3 (P75_3) (1:13)
-
StartNAPALM: Multiple BGP neighbors (P75_4) (4:42)
-
StartNAPALM and bigger BGP Network Part 1 (P75_5) (4:23)
-
StartNAPALM and bigger BGP network Part 2 (P75_5b) (2:51)
Use NAPALM for device configuration audit and changes
Available in
days
days
after you enroll
-
StartUse NAPALM to configure Access lists (P75_6) (3:45)
-
StartCheck if ACL already exists and add if missing (P75_7) (4:17)
-
StartUse NAPALM for auditing device configs (P75_8) (0:52)
-
StartUse NAPALM to add multiple config files (P75_9) (4:08)
-
StartNAPALM: Multiple config files, multiple devices (P75_10) (3:55)
Iteration Examples: Netmiko scripts
Available in
days
days
after you enroll
-
StartNetmiko Iteration: Script Overview (5:51)
-
StartNetmiko Iteration (Script 1): Basic Script (1:32)
-
StartNetmiko Iteration (Script 2): Open a file of commands (5:50)
-
StartNetmiko Iteration (Script 3): Configure multiple devices using a file of devices (7:23)
-
StartNetmiko Iteration (Script 4): Remove passwords from script (4:13)
-
StartNetmiko Iteration (Script 5): Except (Error) Handling (7:36)
-
StartNetmiko Iteration (Script 6): Determine device types and run specific device type (7:43)
-
StartNetmiko Iteration (Script 7): Iterate device type script (3:03)
Netmiko Scaling
Available in
days
days
after you enroll
Python Theory
Available in
days
days
after you enroll
Python Theory: Objects, Variables and Data Types
Available in
days
days
after you enroll
-
StartPython Objects (P61_1) (5:12)
-
StartPython Objects Part 2 (P61_2) (1:12)
-
StartPython Variables (P61_3) (3:30)
-
StartPython Variables Part 2 (P61_4_5) (2:35)
-
StartPython Variables Part 3 (P61_6) (4:15)
-
StartPython Variables Part 4 (P61_7_8) (2:26)
-
StartData Types (P61_9) (1:47)
-
StartData Type testing (P61_10) (3:14)
Python Theory: Numbers
Available in
days
days
after you enroll
-
StartPython Theory: Numbers (0:58)
-
StartNumeric Types (P61_11) (1:50)
-
StartInt and Float (P61_12) (1:45)
-
StartOperators (P61_14) (4:35)
-
StartOperators Part 2 (P61_15_16) (6:27)
-
StartOperators (P61_17_18) (3:27)
-
Startbin hex oct (P61_20) (1:33)
-
Startbinary decimal octal number examples (P62_1) (0:31)
-
Startint calculation (P62_2) (3:12)
-
StartFloats (P62_3) (2:10)
Python Theory: Strings
Available in
days
days
after you enroll
-
Startstrings (P62_4) (3:33)
-
Startstrings (GT 06-8-17 7_8) (3:23)
-
Startconvert to a string using str() (P62_10) (0:38)
-
Startescape special character meaning with \ (P62_12) (3:02)
-
Startstrings (P62_9) (1:58)
-
Startstring concatenation with + (P62_13) (1:26)
-
Startmultiplication operator * (P62_16) (1:25)
-
Startstring offsets - extract characters with [] (P62_17) (3:36)
-
Startstring slice _ slicing (P62_string) (3:36)
-
Startstring slice _ slicing 2 (P62_1string) (2:16)
-
Startstring slice _ slicing 3 (P62_2string) (1:23)
-
Startlower upper (P73_11) (2:10)
-
Startstartswith endswith (P73_12) (2:13)
-
Startstrip lstrip rstrip (P73_13) (2:14)
-
Startisdigit (P73_14) (1:15)
-
Startcount (P73_15) (3:17)
-
StartOld Style text using % (P66_24) (3:33)
-
StartStrings: New way to do text using {} (P73_16) (2:38)
-
Startdir (P73_9) (1:43)
Get version information from a switch
Available in
days
days
after you enroll
-
StartGet show version from switch (P65_14) (4:18)
-
StartTelnet and string offset (P65_16) (4:36)
-
StartShow version using len (P65_17) (2:02)
-
StartSplit 1 (P65_18_21) (1:56)
-
StartSplit 2 (P73_18) (1:18)
-
StartList and join (P73_17) (2:52)
-
StartList and len - use Interface example (P73_25) (1:47)
-
StartIndex introduction(P66_1) (3:16)
-
StartReal switch get version using index and slice (P66_2_3) (3:53)
-
StartPython3 telnet to switch (P66_4) (3:22)
-
StartCount (P66_6) (5:59)
-
StartUse find to get information from a real switch (P66_10) (5:20)
-
StartPython3 Telnet versus Python2 - Find version of software (P66_11) (3:18)
-
Startfind not found (P66_12) (0:51)
-
StartString methods - upper (P66_13) (1:42)
-
StartString methods - startswith and endswith (P66_14) (1:43)
-
StartString methods - strip (P66_15) (3:08)
-
StartString methods - split demo (P66_16) (1:09)
-
StartString methods - Join (P66_17_18) (0:47)
-
StartString methods - is it in string? (P66_19) (1:00)
-
StartString concatenation (P66_20) (0:30)
-
StartCapitalize, upper, lower, swap (P66_23) (1:46)
Python Theory: Comparisons
Available in
days
days
after you enroll
Python Theory: Lists
Available in
days
days
after you enroll
-
StartLists versus tuples (3:05)
-
Startlists (2:44)
-
Startcreate a list using split (3:08)
-
Startlists in lists (4:48)
-
Startlists versus tuples - documentation (0:47)
-
Startlist merge and extend (1:43)
-
StartList methods (1:35)
-
Startlists insert and delete (4:09)
-
Startlist pop index and in (3:55)
-
Startreverse sort (4:37)
-
Startlen copy list (3:56)
Python Theory: Tuples
Available in
days
days
after you enroll
Python Theory: Code Structures
Available in
days
days
after you enroll
Python Theory: if / else / elseif logic
Available in
days
days
after you enroll
Python Theory: While Loops
Available in
days
days
after you enroll
Python Theory: For Loops
Available in
days
days
after you enroll
Python Theory: Ranges
Available in
days
days
after you enroll
Python Theory: Dictionaries
Available in
days
days
after you enroll
Python Theory: Functions
Available in
days
days
after you enroll
Overlay SDN Solutions (Network Virtualization) COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
Analogous Overlay Networks
Available in
days
days
after you enroll
Paul and Peter (Server versus Network)
Available in
days
days
after you enroll
Demo - Nuage Networks VSP
Available in
days
days
after you enroll
-
StartNuage Networks Topology and Components (5:58)
-
StartDemo VSP Visibility - Power on off (6:40)
-
StartDemo Automatic ACLs and Policies Part 1 (5:33)
-
StartDemo Automatic ACLs and Policies Part 2 (3:59)
-
StartDemo Nuage GUI and CLI (4:39)
-
StartDemo Automatic OpenFlow rules (10:07)
-
StartDemo Multiple ESXi Hypervisors (4:17)
-
StartDemo VM Locations (1:31)
-
StartDemo What happens when the underlay breaks (3:10)
-
StartDemo Layer 2 Domain spanning the DC (7:06)
-
StartDemo Dynamic Tunnel creation and teardown (4:25)
VMware NSX
Available in
days
days
after you enroll
Pica8 WhiteBox Switching, SDN and OpenFlow Fundamentals COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
Pica8 overview
Available in
days
days
after you enroll
White Box Data Center
Available in
days
days
after you enroll
Pica8 OS Architecture
Available in
days
days
after you enroll
Open Data Center Framework
Available in
days
days
after you enroll
Demo: Pica8, OpenFlow and HP VAN SDN Controller
Available in
days
days
after you enroll
Demo: Pica8, OpenFlow and OpenDaylight (ODL)
Available in
days
days
after you enroll
Demo: Pica8, OpenFlow and Floodlight
Available in
days
days
after you enroll
Demo: Pica8 Open vSwitch - manual flow addition
Available in
days
days
after you enroll
Demo: Layer 2 / Layer 3 functionality - basic networking
Available in
days
days
after you enroll
Demo: BGP
Available in
days
days
after you enroll
CUMULUS COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
Cumulus Linux Introduction
Available in
days
days
after you enroll
Cumulus Linux Architecture
Available in
days
days
after you enroll
Cumulus VX and GNS3
Available in
days
days
after you enroll
-
StartCumulus VX Introduction (0:43)
-
StartCumulus VX FAQs (1:29)
-
StartCumulus VX Technical Documentation (0:37)
-
StartImport OVA (2:22)
-
StartBuild Topology (2:55)
-
StartSpine and Leaf (0:34)
-
StartStart up and connect (1:03)
-
StartSwitch port configuration (4:24)
-
StartBridge configuration (5:30)
-
StartSVI configuration and ping tests (1:43)
-
StartCreate multiple VLANs (4:26)
Initial Setup
Available in
days
days
after you enroll
-
StartCumulus Linux Initial Setup (2:51)
-
StartRequired Components (0:53)
-
StartSwitch initial boot up (1:16)
-
StartWebserver image download (0:12)
-
StartONIE intelligence (5:26)
-
StartDEMO Install ONIE (3:00)
-
StartLogging into a Switch (2:04)
-
StartDefault User Accounts (1:55)
-
StartExample Add a user (0:59)
-
StartCumulus Linux Licensing (3:16)
-
StartLicensing (continued) (0:53)
-
StartLicense Format (1:15)
-
StartDEMO Interfaces and license install on physical (5:19)
-
StartIP address configuration (1:14)
-
StartVRFs - MRFs (0:56)
-
StartAutomation of Initial Switch Configuration (ZTP) (1:13)
-
StartAutomation (continued) (0:49)
-
StartAutomation Option 239 (1:58)
-
StartZTP (continued) (1:48)
-
StartZTP scripts (2:56)
-
Startdhcpd.conf file (0:41)
-
StartZTP script example (1:08)
-
StartDEMO Zero Touch Provisioning (ZTP) (4:14)
Layer 2 Features
Available in
days
days
after you enroll
-
StartLayer 2 Features (0:05)
-
StartOverview of topics (0:17)
-
StartOverview of topics (0:25)
-
StartWhitebox switches (2:08)
-
StartPort Layouts (1:57)
-
StartInterfaces on Cumulus Linux switches (1:14)
-
StartCumulus Interface config (1:22)
-
Startetcnetworkinterfaces (0:42)
-
Starteth0 configuration (4:47)
-
StartLoopback interface configuration (1:52)
-
StartPhysical switch ports (4:35)
-
StartDEMO Activate and define interfaces (3:00)
-
StartBonds (Link Aggregation) (1:57)
-
StartConfigure a bond (4:21)
-
StartBond status and troubleshooting (0:48)
-
StartDEMO Bonding using physical switches (4:45)
-
Startnetshow (2:23)
-
StartBridge (2:41)
-
StartVLAN Aware Bridge (3:24)
-
StartSpanning Tree (0:39)
-
StartSwitch VLAN Interface (SVI) (0:55)
-
Start802.1Q Tagged Interfaces (2:30)
-
Start802.1Q Tagged Interfaces (continued) (2:17)
-
StartAccess ports (1:45)
-
StartScalability - range of ports, glob, regular ex (3:32)
-
StartDisplay port state (1:47)
-
StartAdmin versus Physical link state (1:04)
-
StartDisplay Bridge Status (2:35)
-
StartDisplay VLAN allocation (0:53)
-
StartDisplay STP bridge configuration (1:47)
-
StartSpanning Tree on Linux Bridge versus VLAN aware (1:52)
-
Startnetshow interface (1:24)
-
StartDEMO Create a Bridge (4:06)
-
StartDEMO Create a Bridge (continued) (1:23)
Troubleshooting
Available in
days
days
after you enroll
-
StartOverview (0:05)
-
StartTopics in module (0:12)
-
Startip -s link show (1:05)
-
Startethtool (2:34)
-
StartDEMO Troubleshooting tools - ethtool (0:59)
-
StartLLDP (0:41)
-
StartDEMO LLDP neighbors (0:39)
-
StartSensors (1:02)
-
StartDEMO sensors (0:19)
-
Startcl-netstat (1:09)
-
StartDEMO netstat (0:52)
-
Startnetshow interface all (0:52)
-
StartDEMO netshow system (0:26)
-
Startnetwork interface bridge (0:32)
-
StartDEMO netshow (0:07)
-
Startping (0:35)
-
Starttraceroute (0:19)
-
Startip route show and ip route get (1:58)
-
Startarp -a and -d (0:46)
-
Starttcpdump (1:07)
-
Startmz and iperf (1:51)
-
Startcl-support (1:57)
-
StartDEMO cl-support - Part 1 (0:22)
-
StartDEMO cl-support (continued) (0:54)
-
Startwatchdog (0:45)
-
Startlog files (1:49)
-
StartDEMO PSU and Fan status (0:46)
-
StartDEMO decode-syseeprom (0:14)
-
StartCumulus Support (0:58)
Routing on Cumulus Linux
Available in
days
days
after you enroll
-
StartQuagga Overview (1:21)
-
StartSupported Routing Protocols (1:15)
-
StartArchitecture (2:37)
-
StartConfigure Quagga via the modal CLI (0:10)
-
StartEnable routing protocols (1:45)
-
StartRestart an individual routing protocol (0:32)
-
StartASICs and route limitations (0:49)
-
StartConfigure Quagga via CLI (2:07)
-
StartHelp using (0:36)
-
StartView routing table (2:11)
-
Startshow running-config, write memory, ca (1:21)
-
StartConfigure Quagga via the non-modal CL (2:06)
-
Startvtysh versus non-modal CLI (3:19)
-
StartConfiguration persistency (0:29)
-
Startlist, tab and cl-bgp command (1:23)
-
Startcl-rctl running-config (0:55)
-
StartDebugging Quagga (2:30)
-
StartZebra Log (0:27)
-
StartDEMO SVI IP addresses and OSPF (2:19)
-
StartDEMO Enable Zebra and OSPF (5:19)
Automation using DevOps Tools (Ansible)
Available in
days
days
after you enroll
-
StartDevOps Overview (0:26)
-
StartAutomation overview (0:37)
-
StartGoal of Automation (4:40)
-
StartCumulus Automation (1:07)
-
StartMain automation metho (1:19)
-
StartPush versus Pull (2:48)
-
StartComparison of Automat (2:14)
-
StartZTP and Automation (1:09)
-
StartAnsible Automation Ex (2:57)
-
StartZTP script (0:39)
-
StartAnsible Configuration (0:34)
-
StartAnsible Conf ansible.cf (1:43)
-
StartAnsible Hosts File (1:36)
-
StartAnsible Modules and (2:48)
-
StartAnsible Modules and (1:04)
-
StartThree levels of Ansible (2:51)
-
StartSimple interface desc (2:02)
-
StartRun a simple Ansible (1:32)
-
StartOutput from simple Pl (0:59)
-
StartMultiple Ansible file (0:38)
-
StartScaling Ansible Playb (1:29)
-
StartAnsible tree (2:12)
-
StartOrder of Playbook exe (1:03)
-
StartAnsible playbook.yml (1:21)
-
StartAnsible variables and (1:57)
-
StartRun an Ansible playbook (1:00)
-
StartReference Materials (0:26)
-
StartDEMO Ansible Overview (1:41)
-
StartDEMO Ansible installa (4:41)
-
StartDEMO Ansible, github, (3:26)
Image Management
Available in
days
days
after you enroll
-
StartImage Management Overview (0:19)
-
StartImage Slots (1:52)
-
StartSlots are independent (0:17)
-
Startmntpersist (1:40)
-
StartCreate a persistent configuration (0:28)
-
StartMigrate configuration (0:37)
-
StartImage management process fixwb (3:59)
-
StartInstall a Full Image (0:48)
-
StartBack up configuration (0:52)
-
StartSelect the alternate slot (0:20)
-
StartCopy files from mntpersist (0:27)
-
StartClear out mntpersist (0:48)
-
Startapt-get upgrades (0:55)
-
StartDEMO View Slots, install new image (2:52)
-
StartDEMO Reboot switch into image (1:01)
-
StartDEMO Verify slot used. Upgrade soft (1:08)
All Lab Demos
Available in
days
days
after you enroll
-
StartDEMO Interfaces and license install on physical (5:19)
-
StartDEMO Zero Touch Provisioning (ZTP) (4:14)
-
StartDEMO Active and define interfaces (4:07)
-
StartDEMO Bonding using physical switches (4:45)
-
StartDEMO Create a Bridge (4:06)
-
StartDEMO Create a Bridge (continued) (1:23)
-
StartDEMO Troubleshooting tools - ethtool (0:59)
-
StartDEMO sensors (0:19)
-
StartDEMO netstat (0:43)
-
StartDEMO LLDP neighbors (0:39)
-
StartDEMO PSU and Fan status (0:46)
-
StartDEMO decode-syseeprom (0:14)
-
StartDEMO cl-support (0:22)
-
StartDEMO netshow (0:54)
-
StartDEMO cl-support (continued) (0:07)
-
StartDEMO netshow system (0:26)
-
StartDEMO SVI IP addresses and OSPF (2:19)
-
StartDEMO Enable Zebra and OSPF (5:19)
-
StartDEMO Ansible Overview (1:41)
-
StartDEMO Ansible installation (4:41)
-
StartDEMO Ansible, github, playbook.yml (3:26)
-
StartDEMO View Slots, install new image (2:52)
-
StartDEMO Reboot switch into image (1:01)
-
StartDEMO Verify slot used. Upgrade software. (1:08)
-
StartDEMO Install ONIE (3:00)
Linux for Network Engineers: Practical Linux with GNS3: COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
Why should you learn Linux?
Available in
days
days
after you enroll
GNS3 Linux Networks Part 1
Available in
days
days
after you enroll
-
StartDHCP Server (3:45)
-
StartDHCP Client (5:06)
-
StartNAT and Internet testing (1:52)
-
StartStatic Linux Docker Container PC (3:51)
-
StartNetwork Testing DHCP, Static, DNS, Internet (2:20)
-
StartUbuntu Desktop QEMU VM (5:51)
-
StartUbuntu Server Download and VMware import (3:24)
-
StartUbuntu Server installation (6:44)
-
StartIntegrate Ubuntu Server Virtual Machine with GNS3 (3:42)
-
StartUbuntu Server- Manual IP address configuration and testing (5:48)
Linux Fundamentals: Which Linux distro?
Available in
days
days
after you enroll
Linux Fundamentals: Text Editors
Available in
days
days
after you enroll
Linux Fundamentals
Available in
days
days
after you enroll
Linux Fundamentals: File Systems
Available in
days
days
after you enroll
Linux Fundamentals: Files, tools, owners, permissions
Available in
days
days
after you enroll
Linux Fundamentals: Copy, move, delete
Available in
days
days
after you enroll
Linux Fundamentals: Users, Groups, Passwords
Available in
days
days
after you enroll
Linux Fundamentals: Permissions
Available in
days
days
after you enroll
Processes
Available in
days
days
after you enroll
Linux Fundamentals: Software Installation
Available in
days
days
after you enroll
Put Linux to Work: TFTP Server
Available in
days
days
after you enroll
Put Linux to work: DNS Server
Available in
days
days
after you enroll
Put Linux to work: DHCP Server
Available in
days
days
after you enroll
Put Linux to work: Linux Switch
Available in
days
days
after you enroll
GNS3, Docker, Open vSwitch, SDN, OpenDaylight and OpenFlow
Available in
days
days
after you enroll
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 1 GNS3 Switching Part 7 (7:33)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 2 GNS3 Switching Part 8 (10:21)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 3 GNS3 Switching Part 9 (15:31)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 4 GNS3 Switching Part 10 (11:28)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 5 GNS3 Switching Part 11 (7:58)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 6 GNS3 Switching Part 14 (7:04)
-
StartGNS3 Talks Docker, Open vSwitch, SDN and OpenFlow Part 7 GNS3 Switching Part 15 (3:41)
-
StartGNS3 Talks Ubuntu Docker Container, OpenDaylight, Python, SDN Part 1 (3:32)
-
StartGNS3 Talks Ubuntu Docker Container, OpenDaylight, Python, SDN Part 2 (5:49)
-
StartGNS3 Talks Ubuntu Docker Container, OpenDaylight, Python, SDN Part 3 (6:57)
-
StartGNS3 Talks OpenDaylight installation Ubuntu Docker Container, OpenDaylight, Python (6:59)
-
StartGNS3 Talks Create a Docker based network using OVS and Linux Containers (6:40)
-
StartGNS3 Talks- OpenFlow captures using Wireshark, Docker containers, OpenDaylight, SDN (9:18)
-
StartGNS3 Talks- OpenFlow FLOW MOD, PACKET IN, PACKET OUT and more captures using Wireshark (9:16)
GNS3 Fundamentals Part 1: COURSE CONTENT FROM HERE: Introduction
Available in
days
days
after you enroll
GNS3 Overview
Available in
days
days
after you enroll
GNS3 Hardware requirements
Available in
days
days
after you enroll
Emulated versus Simulated devices
Available in
days
days
after you enroll
IOS Image selection
Available in
days
days
after you enroll
Network Operating Systems
Available in
days
days
after you enroll
Downloading VIRL images
Available in
days
days
after you enroll
GNS3 2.0 Architecture
Available in
days
days
after you enroll
Version 2.0 updates
Available in
days
days
after you enroll
-
StartUpgrade to version 2.0 (16:16)
-
Start2.0 Portable Projects - easily export and import GNS3 projects (3:47)
-
Start2.0 Profiles = multiple settings for different scenarios (3:46)
-
StartGNS3 2.0 New Features Smart packet capture and capture on any link (4:07)
-
StartGNS3 2.0 New Feature Support for color-blind users (2:02)
-
StartGNS3 2.0 New Feature Connect IOSv, IOSvL2 and other Qemu devices while power (1:47)
-
StartGNS3 2.0 New Feature Select where VPCS runs (2:27)
-
StartGNS3 2.0 NAT node (9:09)
-
StartGNS3 Talks Fast IOSv boot (9:39)
-
StartMac OS with Windows 10 Virtual Machine = Mac+GNS3+GNS3 VM+Windows 10 VM+Cisc (7:51)
-
StartGNS3 Talks Multiple clients sharing projects in real time, plus console sess (9:55)
GNS3 2.0 ESXi, GNS3 VM and KVM support - leverage servers
Available in
days
days
after you enroll
GNS3 Switching Options
Available in
days
days
after you enroll
-
StartGNS3 switching setup and options Cisco and other switching options in GNS3 (14:35)
-
StartGNS3 unmanaged built-in switch (13:27)
-
StartRouter on a stick with GNS3 unmanaged (6:34)
-
StartEtherswitch Router for Cisco Dynamips Part 1 (13:36)
-
StartEtherswitch Router for Cisco Dynamips Part 2 (6:40)
-
StartEtherswitch Router for Cisco Dynamips Part 3 (16:33)
Cisco ASAv
Available in
days
days
after you enroll
Cisco Nexus
Available in
days
days
after you enroll
Cisco IOS-XR
Available in
days
days
after you enroll
-
StartGNS3 Talks Cisco IOS-XRv import and configuration Part 1 Don't forget to commit your changes! (8:16)
-
StartGNS3 Talks Cisco IOS-XRv import and configuration Part 2 Don't forget to commit your changes! (7:16)
-
StartGNS3 Talks Cisco IOS-XRv import and configuration Part 3 OSPF IOS-XRv and IOSv (6:43)
GNS3 Cisco CSR 1000v
Available in
days
days
after you enroll
Packet, GNS3 and the cloud
Available in
days
days
after you enroll
-
StartPacket.net and GNS3 (Part 1)- Overview (4:35)
-
StartPacket.net and GNS3 (Part 2)- Documentation, Discounts and signup (5:10)
-
StartPacket.net and GNS3 (Part 3)- SSH Keys (Generate with PuttyGen) (4:21)
-
StartPacket.net and GNS3 (Part 4)- Deploy Server and setup VPN (8:56)
-
StartPacket.net and GNS3 (Part 5)- Integrate the GNS3 GUI with Packet.net server (8:25)
GNS3 Campus - CCNA topics
Available in
days
days
after you enroll
-
StartCampus Overview (7:02)
-
StartHostnames, VTP, VLANs Part 1 (5:57)
-
StartHostnames, VTP, VLANs Part 2 (9:13)
-
StartIP addressing and ping tests (8:05)
-
StartStatic trunk encapsulation and mode (5:27)
-
StartDisable DTP and configure access ports (9:06)
-
StartPing within a VLAN (2:35)
-
StartWhich ports are trunking and (3:23)
-
StartCDP Demo Basic discovery (7:28)
-
StartCDP Demo Disable globally (6:49)
-
StartCDP Demo Command Options (4:20)
-
StartLLDP Demo Discover Linux Servers (6:41)
-
StartSpanning Tree Which Ports are blocking (3:58)
-
StartSpanning Tree blocks core switch ports (7:11)
-
StartCDP & LLDP and STP - what happens (2:40)
-
StartSTP - optimize Core switches (10:03)
-
StartOptimize the campus using Etherchannel (14:25)
-
StartSTP failover testing (13:53)
-
StartHSRP overview (6:44)
-
StartHSRP Configuration Switch 1 (6:15)
-
StartDemo- HSRP Configuration- Switch 2 (8:22)
-
StartDemo Test connectivity to HSRP router (2:49)
-
StartDemo HSRP failover test (6:54)
-
StartEIGRP Configuration (6:16)
-
StartEIGRP Configuration (continued) (7:43)
-
StartEIGRP Redistribute Static Route (5:14)
-
StartTroubleshoot GNS3 cloud issue (1:41)
-
StartConfigure NAT and test (7:54)
Ostinato
Available in
days
days
after you enroll
-
StartGNS3 Talks Ostinato Packet Generator and GNS3 - download, install and configure (Ostinato Part 1) (9:00)
-
StartGNS3 Talks Ostinato Packet Generator - what happens to Unknown Unicast traffic (Ostinato Part 2) (3:00)
-
StartGNS3 Talks Ostinato Packet Generator - Multicast traffic what happens (Ostinato Part 3) (9:04)
-
StartGNS3 Talks Ostinato Packet Generator - Broadcast traffic What happens (Ostinato Part 4) (6:22)
-
StartGNS3 Talks Ostinato Packet Generator - Craft packets to hack network devices (Ostinato Part 5) (7:20)
-
StartGNS3 Talks Ostinato Packet Generator - Inject 802.1Q frames for VLAN hopping (Ostinato Part 6) (8:39)
-
StartGNS3 Talks Ostinato Packet Generator - double tag 802.1Q frames for VLAN hopping (Ostinato Part 7) (3:14)
-
StartGNS3 Talks Make your PC the Spanning Tree Root by crafting BPDUs with Ostinato (Ostinato Part 8) (16:40)
-
StartGNS3 Talks Stop BPDUs from Ostinato breaking STP using STP Root Guard (Ostinato Part 9) (4:17)
-
StartCCNA #070 Using Ostinato to prove how networks work for the CCNA Exam. Don't be bitten! (7:33)
-
StartCCNA #071 Using Ostinato to prove how broadcasts work for the CCNA Exam (Part 1) (6:30)
-
StartGNS3 Talks Ostinato Wireshark Captures Part 1 Capture STP BPDUs & craft own (Ostinato Part 10) (10:25)
-
StartGNS3 Talks Ostinato Wireshark Captures Part 2 Capture IP Phone CDP messages & craft your own (6:09)
-
StartGNS3 Talks Ostinato Wireshark Captures Part 3 Capture IP Phone CDP messages & craft your own (7:09)
-
StartGNS3 Talks Ostinato Wireshark Captures Part 4 Generate packets with COS and DSCP settings (6:14)
-
StartGNS3 Talks Ostinato Wireshark Captures Part 5 Capture and generate GNS3 switch CDP (4:23)
NEW CONTENT: Other GNS3 talk videos
Available in
days
days
after you enroll
-
StartHPE VSR, VNC Console and Cisco integration Part 1 (10:57)
-
StartHPE VSR, VNC Console and Cisco integration Part 2 (9:21)
-
StartGNS3 Talks ipterm Linux, Docker, Python, SDN and more! Part 1 (7:54)
-
StartGNS3 Talks ipterm Linux, Docker, Python, SDN and more! Part 2 (6:05)
-
StartGNS3 Talks ipterm Linux, Docker, Python, SDN and more! Part 3 (8:42)
-
StartMac OS X, HPE VSR, Chicken of the VNC, Cisco CSR Part 1 (8:58)
-
StartMac OS X, HPE VSR, Chicken of the VNC, Cisco CSR Part 2 (7:21)
-
StartGNS3 Talks Syslog with Papertrail - easy, online, free syslog server for your GNS3 Labs! (9:28)
-
StartGNS3 Talks Syslog with Slack and Papertrail = view your GNS3 Lab syslog messages in Slack! (6:04)
-
StartGNS3 Talks Firefox appliance - add a Web browser to your GNS3 topologies (6:31)
-
StartGNS3 Talks GNS3 2.0 RC1 is now available (1:55)
-
StartGNS3 2.0 has been released! Upgrade GNS3 GUI and GNS3 VM on Mac OS (10:36)
Troubleshooting Part 1 View this first
Available in
days
days
after you enroll
Troubleshooting Part 2: Memory and router crashes
Available in
days
days
after you enroll
IMPORTANT: Recommendations (GNS3 VM versus Dynamips)
Available in
days
days
after you enroll
GNS3 VM - what should I download?
Available in
days
days
after you enroll
Installation of GNS3 using the GNS3 VM
Available in
days
days
after you enroll
-
StartGNS VM download (1:45)
-
StartVirtualBox import (0:44)
-
StartSetup Wizard (2:21)
-
StartSetup wizard (continued) (2:40)
-
Startunpublished- GNS3 VM IOS upload (1:14)
-
StartGNS3 VM router setup (2:54)
-
StartGNS3 VM and OSPF demonstration (3:19)
-
StartLocal server and Local GNS3 VM demonstration (5:28)
-
StartRecommendations (0:56)
GNS3 VMware VM
Available in
days
days
after you enroll
GNS3 GUI Part 1 Workspace and others
Available in
days
days
after you enroll
GNS3 GUI Part 2: Projects
Available in
days
days
after you enroll
GNS3 GUI Part 3: Snapshots
Available in
days
days
after you enroll
GNS3 GUI Part 4: More GUI Options & demonstrations
Available in
days
days
after you enroll
VPCS - lightweight PCs
Available in
days
days
after you enroll
Router on a stick (IOS router and GNS3 Layer 2 switch)
Available in
days
days
after you enroll
GNS3 Hub, Switch, Wireshark captures (including password capturing)
Available in
days
days
after you enroll
Cisco Etherswitch Service module (Layer 2 switching)
Available in
days
days
after you enroll
-
StartCisco Etherswitch Service Module Overview (1:39)
-
StartCreate topology (2:18)
-
StartSpanning Tree, PCMCIA setup, memory setup (6:53)
-
StartFormat Flash and set up VTP (2:20)
-
StartVerify PC Connectivity (1:47)
-
StartSpanning Tree testing (2:51)
-
StartMove PCs to another VLAN (4:23)
-
StartGNS3 Etherswitch Wizard (2:06)
-
StartGNS3 Macros (1:06)
GNS3 Frame Relay switch
Available in
days
days
after you enroll
Cisco IOS router as a Frame Relay switch
Available in
days
days
after you enroll
Connect GNS3 to the Internet and enable NAT
Available in
days
days
after you enroll
GNS3 Talks
Available in
days
days
after you enroll
-
StartInstall GNS3 on a Mac (with GNS3 VM) (12:28)
-
StartIOSvL2 appliance import (8:06)
-
StartGNS3 1.5.X Appliance Tips (2:34)
-
StartIOSv Appliance (10:59)
-
StartGNS3 VM Internet appliance (14:26)
-
StartGNS3 VM and physical device OSPF route exchange (9:03)
-
StartYour First GNS3 Topology with VPCS (4:31)
Solarwinds Free Tools
Available in
days
days
after you enroll
Cumulus VX (Linux Networking Operating System)
Available in
days
days
after you enroll
-
StartCumulus VX Introduction (0:43)
-
StartCumulus VX FAQs (1:29)
-
StartCumulus VX Technical Documentation (0:37)
-
StartImport OVA (2:22)
-
StartBuild Topology (2:55)
-
StartSpine and Leaf (0:34)
-
StartStart up and connect (1:03)
-
StartSwitch port configuration (4:24)
-
StartBridge configuration (5:30)
-
StartSVI configuration and ping tests (1:43)
-
StartCreate multiple VLANs (4:26)
GNS3 VM and ESXi
Available in
days
days
after you enroll
The future of networking?
Available in
days
days
after you enroll
Packet Tracer vs GNS3 vs VIRL vs Physical Equipment
Available in
days
days
after you enroll
Upgrading Docker Containers in GNS3
Available in
days
days
after you enroll
Install Ansible in your GNS3 networks
Available in
days
days
after you enroll
GNS3 Preferences & VMware settings
Available in
days
days
after you enroll
GNS3 Cloud Device: Connect your GNS3 topology to the physical network
Available in
days
days
after you enroll
IDEs
Available in
days
days
after you enroll
Windows GNS3 QEMU appliance
Available in
days
days
after you enroll
Windows Server QEMU Appliance
Available in
days
days
after you enroll
Juniper SRX appliance
Available in
days
days
after you enroll
Juniper SRX 17.3 appliance
Available in
days
days
after you enroll
ipython
Available in
days
days
after you enroll
Multiple GNS3 Servers
Available in
days
days
after you enroll
Multiple GNS3 Servers and a single GNS3 GUI
Available in
days
days
after you enroll
VMware Questions and Issues
Available in
days
days
after you enroll
GNS3 Questions: What can I do?
Available in
days
days
after you enroll
VMware Player
Available in
days
days
after you enroll
Ubuntu Desktop QEMU Appliance
Available in
days
days
after you enroll
Nexus9k
Available in
days
days
after you enroll
Arista
Available in
days
days
after you enroll
Cumulus Linux
Available in
days
days
after you enroll
Linux
Available in
days
days
after you enroll
GNS3 REST API
Available in
days
days
after you enroll
-
StartSoftware is eating the world and the GNS3 REST API: SDN, APIs, Network Programma (7:59)
-
StartGNS3 REST API Part 2: SDN, APIs, Network Programmability (8:35)
-
StartGNS3 REST API Part 3:Create a GNS3 project, add nodes, add links programmability (9:34)
-
StartGNS3 REST API Part 4: Start GNS3 nodes, connect remotely without GUI (4:11)
-
StartGNS3 REST API Part 5: cURL and bash scripting with the GNS3 REST API (11:07)
Cisco IOS time saving commands and tips
Available in
days
days
after you enroll
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 1) (8:29)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 2) (9:41)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 3) (3:02)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 4) (5:29)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 5) (5:13)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 6) (5:53)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 7) (5:15)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 8) (4:18)
-
StartGNS3 Talks Cisco IOS time saving commands and tips (Part 9) (6:27)
CCNA PPP Multilink (Includes Troubleshooting)
Available in
days
days
after you enroll
Talks with Hank Preston
Available in
days
days
after you enroll
-
StartHank Preston Introduction (5:51)
-
StartHow do I get started Python or Ansible? (9:40)
-
StartCCNA or Python CCNP or Python? (8:21)
-
StartWhat is DevOps? What is NetDevOps? (8:40)
-
StartIs there a NetDevOps certification track from Cisco DevNet Demo? (11:13)
-
StartDemonstration (32:57)
-
StartDemonstration 2 Part 1 (24:04)
-
StartDemonstration 2 Part 2 (38:17)
-
StartDocker, Containers, Part 1 (19:13)
-
StartDocker, Containers, Part 2 (24:04)
-
StartKubernetes (46:13)
-
StartHow to setup Windows with bash, git, Python, atom, Postman, Docker Part 1 (28:49)
-
StartHow to setup Windows with bash, git, Python, atom, Postman, Docker Part 2 (16:10)
Talks with Chuck Black
Available in
days
days
after you enroll
-
StartIntroduction (4:02)
-
StartChuck's Patents - Layer 2 discovery and SDN - he has over 15 of them (5:07)
-
StartChuck's book- Software Defined Networking (SDN)- A Comprehensive Approach (7:29)
-
StartFour SDN Definitions- (1) Open SDN (2) Overlays (3) APIs (4) Automation (4:31)
-
StartShould you learn Python? Why you should learn Python? (5:29)
-
StartTop programming languages to learn in 2018 - 2019 (8:59)
-
StartPython Lists vs Dictionaries (7:06)
-
StartWhat is NETCONF? (8:12)
-
StartWhat is a REST API? (4:10)
-
StartWill AI (Artificial Intelligence) take away our jobs? (3:48)
-
StartDo I need a degree Should I study computer science? (5:03)
-
StartJob advice (5:55)
-
StartDoes a network engineer have an advantage? (6:55)
-
StartParadigms- Agile networks (4:48)
-
StartP4 vs OpenFlow vs Traditional networking (4:35)
-
StartIntent based networking (8:28)
-
StartYANG Models? (2:54)
-
StartWhat is NFV? (11:21)
-
StartVirtual Machines vs Containers VMs Docker Kubernetes Part 1 (9:17)
-
StartVirtual Machines vs Containers VMs Docker Kubernetes Part 2 (13:50)
-
StartWhat is SD-WAN? (12:21)
-
StartWhat is Whitebox / Bare Metal switching Open Compute Project OpenStack? (23:05)
-
StartWhat is the Cloud? OVS? Git? GitHub? Jira? Jenkins? (30:35)
-
StartWhat is a VTEP in Overlay SDN Solutions - Virtual Networks? (9:06)
Python: Everything you need to know to become a developer: COURSE CONTENT FROM HERE
Available in
days
days
after you enroll
Module 1: Kick start your Python knowledge
Available in
days
days
after you enroll
Module 2:Lists, For Loop, Reading Files
Available in
days
days
after you enroll
Module 3: Formatted Output, Splitting Strings
Available in
days
days
after you enroll
Module 4: Nested Data Structures, While Loops
Available in
days
days
after you enroll
-
Startm04_00- Introduction (2:37)
-
Startm04_01- Python data structures- list (5:29)
-
Startm04_02- Python data structures- Dictionary (6:50)
-
Startm04_03- Python data structures- sorting (6:48)
-
Startm04_04- Python data structures- nested (10:58)
-
Startm04_05- Python while loop with dictionary search (9:28)
-
Startm04_lab- Can you complete the lab? (4:51)
-
Startm04_lab_sol- Lab Solution and Module Summary (7:42)
Module 5: Functions and Modules
Available in
days
days
after you enroll
Module 6: Miscellaneous Extra Stuff
Available in
days
days
after you enroll
Thank you and further learning
Available in
days
days
after you enroll
CCNP Lab 1.1: Troubleshoot BGP (TSHOOT Exam)
Available in
days
days
after you enroll
CCNP Lab 1.2: Troubleshoot Routing (TSHOOT Exam)
Available in
days
days
after you enroll
CCNP Lab 1.3: Troubleshoot BGP (TSHOOT Exam)
Available in
days
days
after you enroll
CCNP Lab 1.4: Configure BGP (ROUTE Exam)
Available in
days
days
after you enroll
-
StartGNS3 CCNP Lab 1.4-:BGP lab-: Answers Part 1- C1, C2, ISP1 configuration (11:29)
-
StartGNS3 CCNP Lab 1.4: BGP lab: Can you complete the lab? (4:19)
-
StartGNS3 CCNP Lab 1.4- BGP lab- Answers Part 2- ISP3, ISP4 and weight configuration (13:09)
-
StartWhy is the BGP route not in the IP routing table? BGP Next-hop-self: GNS3 CCNP (6:22)
-
StartBGP Next-hop-self configuration options (BGP and IGP): GNS3 CCNP Lab 1.4: Answer (6:58)
CCNP Lab 1.5: Two-way redistribution using tags (ROUTE Exam)
Available in
days
days
after you enroll
Large Scale BGP: Route-maps, AS path prepending: GNS3 CCNP Lab 1.6
Available in
days
days
after you enroll
-
StartGNS3 CCNP Lab 1.6: Can you complete the lab? (6:44)
-
StartGNS3 CCNP Lab 1.6: Answers Part 1: OSPF config AS 65000 (6:58)
-
StartGNS3 CCNP Lab 1.6: Answers Part 2: Core BGP config (13:04)
-
StartGNS3 CCNP Lab 1.6: Answers Part 3 (11:25)
-
StartGNS3 CCNP Lab 1.6: Answers Part 4 (10:52)
-
StartGNS3 CCNP Lab 1.6: Answers Part 5 (11:03)
-
StartGNS3 CCNP Lab 1.6: Answers Part 6 (7:42)
-
StartGNS3 CCNP Lab 1.6: Answers Part 7 (10:00)
Frequently Asked Questions
When does the course start and finish?
The course starts now and never ends! It is a completely self-paced online course - you decide when you start and when you finish.
How long do I have access to the course?
How does lifetime access sound? After enrolling, you have unlimited access to this course for as long as you like - across any and all devices you own.
What if I am unhappy with the course?
We would never want you to be unhappy! If you are unsatisfied with your purchase, contact us in the first 30 days and we will give you a full refund.
off original price!
The coupon code you entered is expired or invalid, but the course is still available!