Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Routing Configuration & Router Administration for Cisco CCNA
Introduction to the Routing Course
S1L1 Intro to Course (4:00)
The Process of Routing
S2L2 Understanding the Routing Process (15:39)
S2L3 Default Routing (16:25)
S2L4 Static Routing (21:30)
Dynamic Routing with RIPv2
S3L5 Dynamic VS. Static Routing (10:14)
S3L6 The RIPv2 Routing Protocol (8:59)
S3L7 Configuring RIPv2 Basics (27:34)
S3L8 Config Default info Sub command in RIPv2 (9:29)
S3L9 Tweaking Timers in RIPv2 (11:17)
S3L10 Passive-Interface Command with RIPv2 (20:36)
S3L11 RIPv2 Static Routes as Backup (19:55)
S3L12 RIPng Basics (13:29)
Dynamic Routing with EIGRP
S4L13 Understanding Basics EIGRP (10:19)
S4L14 Deep with EIGRP (10:04)
S4L15 Config EIGRP with Variance Command (21:53)
S4L16 Passive interface with EIGRP (16:33)
S4L17 Max Paths in EIGRP (7:53)
S4L18 Bandwidth on Interfaces (15:29)
Configuring EIGRPv6 LAB (9:52)
Dynamic Routing with OSPF
OSPF Multiple Area Using Area 0 (25:56)
Multi Area OSPF using Virtual Links (22:54)
OSPF Passive Interface Commands (14:51)
OSPF Multiple Configuration Types (16:48)
OSPF Maximum Path Command (7:11)
Configuring OSPFv3 (6:21)
Dynamic Routing with BGP
Introduction to BGP (8:52)
Configuring eBGP Peering (8:21)
Configuring eBGP Peering and Network Statements (6:44)
Configuring iBGP and Network Commands (11:29)
Redistribution between Networking Routing Protocols
Introduction to Route Redistribution (6:16)
Redistribute RIP2 with BGP (11:49)
Redistribute EIGRP with BGP (8:33)
Redistribute OSPF with BGP (6:18)
Introduction to Routing
CCNA 640-802 or CCNAX 200-120 Certification (22:09)
Using the Packet Tracer Simulator (23:49)
Routers IOS and using the CLI (30:04)
Routers IOS and using the CLI Part2 (35:57)
Routers IOS and using the CLI Part3 (17:18)
Administering the Routers IOS Part1 (22:03)
Administering the Routers IOS Part2 (25:19)
Administering the Routers IOS Part3 (13:26)
Routing Basics
Difference between Routed and Routing Protocols (4:37)
What does the term Routing mean? (22:53)
The IP Routing Process (17:31)
Static and Default Routing Part1 (34:59)
Static and Default Routing Part2 (49:04)
Dynamic Routing
The basics of Routing Protocols (15:49)
Distance – Vector Routing Protocols (25:43)
Routing Information Protocol (RIP) (33:31)
Using Ripv2 and Static Routes Together (30:02)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Introduction to EIGRP (30:30)
Sec4Lec13P2a Introduction to EIGRP (21:55)
Sec4Lec13P2b Introduction to EIGRP (16:48)
Sec4Lec14 EIGRP Lab (39:42)
Open Shortest Path First (OSPF)
Introduction to OSPF (38:02)
Configuring OSPF (42:21)
Router Administration and Routing Final Exam
S1L1 Intro to Course
In this lecture, I will be discussing the topics covered in the CCNA 200-125 Routing Course.
Complete and Continue